Contract c7f454de6029276c48af0047647ac195d0ccfb81a4ac13265f59e1dde19aeef0

fn upgrade(env: soroban_sdk::Env, new_wasm_hash: soroban_sdk::BytesN<32>)

fn version(env: soroban_sdk::Env) -> u32

fn initialize(
    env: soroban_sdk::Env,
    multi_sig: Option,
    usd_token: Option,
    defa: Option,
    invoices_ids: soroban_sdk::Vec,
    borrower_addresses: soroban_sdk::Vec,
    amounts: soroban_sdk::Vec,
    min_amounts: soroban_sdk::Vec,
    pool_values: soroban_sdk::Vec,
) -> (u128, u128)

@notice Allows a borrower to repay their loan linked to a specific invoice.
@dev Repayment can be either full or partial. The function updates the

 outstanding balance of the invoice and adjusts pool state accordingly.

@param invoice_id   Unique identifier of the invoice tied to the loan.
@param amount     Amount being repaid (can be less than or equal to the outstanding loan).

fn repay_loan(env: soroban_sdk::Env, invoice_id: soroban_sdk::String, amount: u128)

@notice Allows a lender to participate in the pool by contributing USD tokens.
@dev

Transfers USD tokens from the lender to the pool.

Issues LP tokens to the lender proportional to their contribution.

Updates pool state including total raised amount and lender details.

@param lender The address of the lender providing funds.
@param amount The amount of USD tokens the lender contributes.

fn participate(env: soroban_sdk::Env, lender: soroban_sdk::Address, amount: u128)

@notice Accept the admin role.
@dev Can only be called by the pending admin proposed earlier via propose_new_admin().

 Once accepted, the pending admin becomes the active admin,

 and the pending slot is reset to zero.

fn accept_admin(env: soroban_sdk::Env)

@notice Executes a pool by allocating funds to the specified invoices.
@dev Used when the pool becomes active. Distributes or locks capital

 against the provided invoice IDs with their respective amounts.

@param invoicesids   Array of invoice identifiers to be executed within the pool.
@param amounts       Array of amounts to be allocated for each corresponding invoice.

fn execute_pool(
    env: soroban_sdk::Env,
    invoicesids: soroban_sdk::Vec,
    amounts: soroban_sdk::Vec,
)

fn __constructor(
    env: soroban_sdk::Env,
    admin: soroban_sdk::Address,
    im_reciver: soroban_sdk::Address,
    token_multiplier: u128,
)

@notice Allows a lender to claim their LP tokens after repayment.
@dev Once borrowers repay, lenders can claim LP tokens that represent

 their share of the repayment and yield. The distribution is done

 proportionally based on each lender’s pool share.

@param lender_addr   Address of the lender claiming their LP tokens.

fn claim_lp_token(env: soroban_sdk::Env, lender_addr: soroban_sdk::Address)

@notice Fills the insurance fund for specific invoices.
@dev Only callable by the admin (secured with onlyAdminSafe).

 The insurance amount is funded from the admin/treasury wallet

 and credited to the pool contract. These funds act as protection

 for lenders in case of borrower default.

@param invoices   Array of invoice identifiers that will be insured.
@param amounts    Array of insurance amounts allocated to each corresponding invoice.

fn fill_insurance(
    env: soroban_sdk::Env,
    invoices: soroban_sdk::Vec,
    amounts: soroban_sdk::Vec,
)

@notice Returns the total claimable amount for a given lender.
@param lender   Address of the lender whose claimable amount is queried.
@return u128  The total claimable amount for the lender.

fn get_claimables(env: soroban_sdk::Env, lender: soroban_sdk::Address) -> u128

fn pause_contract(env: soroban_sdk::Env)

@notice Allows a lender to claim insurance compensation from the pool.
@dev Can be called when a borrower defaults and the pool has

 allocated insurance funds. The function transfers the

 insured portion of the lender’s loss back to their wallet.

@param lender_addr   Address of the lender claiming insurance coverage.

fn claim_insurance(env: soroban_sdk::Env, lender_addr: soroban_sdk::Address)

@notice Allows a lender to claim their liquidity back from the pool.
@dev Typically called after borrower repayments.
@param lender_addr   Address of the lender claiming their liquidity share.

fn claim_liquidity(env: soroban_sdk::Env, lender_addr: soroban_sdk::Address)

@notice Sets the pool APY and (IM) APY.
@dev Can only be called by the admin before the pool is executed.

 Both values are scaled by 1e10 for precision in calculations.


 Emits an {UpdatePercentage} event after updating.

@param  per1   Base pool APY (annual percentage yield).
@param  per2   IM APY.

fn set_percentages(env: soroban_sdk::Env, per1: u128, per2: u128)

fn get_pool_metrics(env: soroban_sdk::Env) -> PoolMetrics

@notice Reconstructs an existing pool with updated parameters.
@dev Used when borrowers fail to fully repay within the original terms,

 or when the pool needs restructuring. Updates invoices with new APYs,

 durations, user states, and IM APYs. New LP tokens or capital

 adjustments may also be applied depending on the pool logic.

@param invoice_ids     Array of invoice identifiers to be restructured.
@param new_apys        Array of updated APYs (annual percentage yields)

                  applied to each corresponding invoice.

@param new_durations   Array of updated pool durations for each invoice.
@param user_states     Array of boolean flags indicating borrower states

                  (e.g., active, defaulted, or restructured).

@param new_im_apys      Array of updated IM APY values for each invoice.

fn reconstruct_pool(
    env: soroban_sdk::Env,
    invoice_ids: soroban_sdk::Vec,
    new_apys: soroban_sdk::Vec,
    new_durations: soroban_sdk::Vec,
    user_states: soroban_sdk::Vec,
    new_im_apys: soroban_sdk::Vec,
)

fn unpause_contract(env: soroban_sdk::Env)

@notice Returns the total claimable DLPs amount for a given lender.
@dev Reads the claimAbleAmount stored in the lender’s details.

 This represents the amount the lender is entitled to withdraw DLPs


 (e.g., from repayments, yield, or insurance depending on logic).

@param _lender   Address of the lender whose claimable amount is queried.
@return u128  The total claimable amount for the lender.

fn get_claimable_lps(env: soroban_sdk::Env, lender: soroban_sdk::Address) -> u128

@notice Returns the shareholding percentage of a lender in the pool.
@dev Calculates the lender’s share relative to the total amount raised.

 Formula: (lender.poolShare * percentDivider) / amountRaised

 where `percentDivider` is typically a constant 100* 1e10

 for precision in percentage calculations.

@param lender_addr          Address of the lender whose shareholding is queried.
@return shareHolding    Lender’s shareholding expressed as a percentage

                    (scaled by `percentDivider`).

fn get_share_holding(env: soroban_sdk::Env, lender_addr: soroban_sdk::Address) -> u128

fn initiate_transfer(env: soroban_sdk::Env, to: soroban_sdk::Address, value: u128)

@notice Propose a new admin for the contract.
@dev Only the current admin  can call this function.

 The new admin must later accept the role by calling `accept_admin()`.

@param new_admin The address proposed to become the new admin.

fn propose_new_admin(env: soroban_sdk::Env, new_admin: soroban_sdk::Address)

fn emergency_withdraw(env: soroban_sdk::Env, token: soroban_sdk::Address, amount: u128)

fn get_lender_address(
    env: soroban_sdk::Env,
    start: u32,
    end: u32,
) -> soroban_sdk::Vec

@notice Returns details of a specific lender in the pool.
*
@param lender   Address of the lender.
@return poolShare         Lender’s share of the pool.
@return claimedLpToken    LP tokens already claimed.
@return claimedInsurance   Insurance already claimed.
@return claimedAmount      Stablecoin amount already claimed.
@return isExists           Whether lender record exists.

fn get_lender_details(
    env: soroban_sdk::Env,
    lender: soroban_sdk::Address,
) -> LenderDetails

fn update_im_receiver(
    env: soroban_sdk::Env,
    new_receiver: Option,
)

@notice Returns borrower and funding details of a specific invoice.
*
@param invoice_id   Unique identifier of the invoice.
@return borrower        Borrower address linked to the invoice.
@return principalAmount Total principal requested in the invoice.
@return minAmount       Minimum required funding amount.
@return loanStartTime   Timestamp when the loan started.
@return isExists        Whether the invoice record exists.
@return amountAllocated Capital allocated from the pool to this invoice.
@return repaidAmount    Total amount repaid so far.
@return fullyPaid       Whether the invoice has been fully repaid.
@return fundsReceived   Whether borrower has received the funds.

fn get_invoice_details(
    env: soroban_sdk::Env,
    invoice_id: soroban_sdk::String,
) -> InvoiceDetails

@notice Calculates the total repayment amount for a given invoice.
*
@param invoice_id   Unique identifier of the invoice.
@return u128   The repayment amount.

fn get_total_repayment(env: soroban_sdk::Env, invoice_id: soroban_sdk::String) -> u128

fn emergency_close_pool(env: soroban_sdk::Env)

fn get_granted_invoices(env: soroban_sdk::Env) -> soroban_sdk::Vec

@notice Updates the LP token contract address used in the pool.
@dev Only callable by the treasury wallet. This function can be used in case

 of contract upgrades, migrations, or if the LP token address needs to be changed.

 Cannot be called after any funds have been raised (`AmountRaised > 0`).

@param lp  Address of the new LP token contract.

fn update_token_address(env: soroban_sdk::Env, lp: soroban_sdk::Address)

@notice Returns the total claimable Insurance for a given lender.
@param _lender   Address of the lender whose claimable amount is queried.
@return u128  The total claimable amount for the lender.

fn get_claimable_insurance(env: soroban_sdk::Env, lender: soroban_sdk::Address) -> u128

fn update_token_multiplier(env: soroban_sdk::Env, multiplier: u128)

@notice Returns payment-related details of a specific invoice.
@dev Excludes the nested _invoiceRepaidAmount mapping.
@param invoice_id   Unique identifier of the invoice.
@return _principalToRepay  Principal amount that must be repaid.
@return _apyToRepay        Accrued APY to be repaid.
@return _imApyToRepay      Invoimate APY fee to be repaid.
@return _isDefault         Whether the invoice is marked as defaulted.
@return _isInsured         Whether the invoice is covered by insurance.
@return _endTime           End time (maturity) of the invoice.
@return _amountInsured     Amount covered under insurance for this invoice.

fn get_invocie_payment_details(
    env: soroban_sdk::Env,
    invoice_id: soroban_sdk::String,
) -> InvoicePaymentDetails

cliver	23.2.1#496ac35be7a7d8d923fcde9bbbc650ee593d1f6f
rssdkver	22.0.7#211569aa49c8d896877dfca1f2eb4fe9071121c8
rsver	1.91.1

Contract c7f454de6029276c48af0047647ac195d0ccfb81a4ac13265f59e1dde19aeef0

Meta

Instances

Interface

Imports

WebAssembly Text (WAT) ▶